Parts List for the Casa Fear Zombie:6'
of 2x4
2 pneumatic cylinders
2 foot brackets
2 rod clevis
2 clevis mounting brackets
2 4-way solenoid valves
1 prop controller
4 3" hinges (wrist/elbow)
2 2.5" hinges (shoulder)
12 carriage bolts (attaching cylinder)
10 flat phillips bolts (hinges)
2 hex bolts (shoulder)
locking nuts/washers for all bolts
drywall screws (elbow hinge, securing wrist hinge to plywood base)
plywood for base
All bolts were 1/4 by 2" long
The original used a picoBoo as the controller but you can use
anything that has at least 2 outputs. Many of us plan to use a
Prop-1 and the EFX guys have written a program (on their web site:
link below) that you can download and use (free).
http://www.efx-tek.com/php/smf/index.php?action=search2
